 |
|
Circa:
'50's-'80's
Price: $65.00 USD
Description: A vintage, miniature fire extinguisher that is 5.5 in. tall and 1.5 in. diameter. Marked Merlite Industries, N.Y. Presto, "C B"Brass Plated.
|
Demo version
|
|
Circa:
'20's-'40's
Price: $95.00 USD
Description: A vintage torch marked Clayton and Lambert. Pat. Jan. 4=1921. It is chrome plated and has a built in pressure pump. Wood handle. Produced in Detroit Mich. USA. 12 in. tall. One dent in side.
|
Demo version
|
|
Circa:
'20's-'40's
Price: $695.00 USD
Description: A vintage branding iron that was used to mark either cattle or logs. Marked Everhot, Maywood, Ill. Comes in the original case that measures 21 x 5.5 x 4 in. Uses liquid white gas. It has a brass fuel ..
|
Demo version
|
|
Circa:
'20's-'30's
Price: $75.00 USD
Description: A vintage oil can that is a pump type with a spring on the bottom to push. Patent dated March 7-1911. Produced in Rochester Minnesota, Enderes co. Stands 9.25 in. tall and is 3 in. diameter. This can ..
|
Demo version
|
|
Circa:
'40's-50's?
Price: $45.00 USD
Description: A vintage spatula that is marked E C Simmons Keen Kutter. Highly collectible. and still useful. Measures 12.25 in. long and is 1.25 in. wide. Wood hadle. In good condition.
|
Demo version
|
|
Circa:
'20's-'30's
Price: $235.00 USD
Description: This very collectible brass blowtorch stands 11.25 in. tall and measures 6.25 in. diameter. In very good condition. The air pump is in the handle. Marked Pat. Applied For. Made by Invincible Mfg. Co. ..
|
Demo version
|
|
Circa:
early 1900's
Price: $32.00 USD
Description: This is a very nice, clean 10" long x 3/4" wide jaw canvas pliers. These are good early 1900's pliers, with good jaw teeth for holding or pulling leather or canvas. The jaw are has about 2.6" clearanc..
|
Demo version
|
|
Circa:
'30's
Price: $48.00 USD
Description: This is an oil type sharpening stone in its original wood box. Measures 3 x 2.5 in. In good condition.
|
Demo version
|
|
Circa:
1900's
Price: $32.00 USD
Description: This is a nice old 6 inch adjustable wrench marked Robinson. DROP FORGED STEEL on the slides of the shaped curved handle. The jaws are in good+ condition with light wear. A nice old antique wrench, ..
|
Demo version
|
|
Circa:
mid 1900's
Price: $85.00 USD
Description: This is a very rare, hard to find pruning saw with a 20" long blade. It is marked "NO. 310 PRUNING SAW CHALLENGER PHILADELPHIA, U.S.A." etched on the blade. The medallion is marked "DISSTON U.S.A." on..
|
Demo version
