10 Pack Reverse USA Flag Tan on IR Magic Black Solas 3.5\"X 2\" MATT REJECT #395 For Sale

10 pack!!!

REVERSE USA FLAG PATCH TAN ON MAGIC BLACK 3.5\"X 2\" MATT FINISH
REJECT #395WITH VELCRO® BRAND FASTENER

THIS PATCH IS A REJECT.

THESE PATCHES ARE NOT PERFECT BY ANY MEANS. SOME OF THESE PATCHES WILL HAVE SMALL BLACK DOTS ON THEM. PATCHES MAY HAVE LARGE DIRT PARTICLES, STREAKS IN THE COLORS,BLURBS INPRINTED IMAGE, OR A COMBINATION OF THESE DEFECTS.
PATCHES WILL BE IDENTIFIABLE, FUNCTIONAL ANDREFLECTIVEBUT NOT IN PERFECT CONDITION.ONE IMPORTANT THING TO KNOW IS THAT THESE REJECTS HAVE A BRITTLE/NONDURABLETOP COAT AND CANNOT BE HANDLED ROUGHLY.

Additional Information about these patches:

Magic Black areas will reflect brightly when viewed with night vision. Patches labeled as Reflective (raw solas) are non covert and will reflect under any condition.

We do not recommend these patches for use in the field, they are only for collecting.Please purchase SolasX patches for use in the field.

Many of thesepatches are uncommon patches, printed for individual units or branches of the military.Many patches have only a limited quantity available for purchase.Most of the REJECT patchesare older patches.The patches labeled as “Old Tan” and “Gloss Finish” were printed before 2007.Patches that have a Matt finish were printed after 2007 that was before we switched over to the SolasX printing process.These patches must not be bent or the topcoat will crack.

These are the same type of patches used by theUSMilitary. The patches were manufactured in our factory here in theUSA.Every step of the process is done here at Anytime Sign, artwork, screen printing, and die cutting.

We use the best quality materials and printing techniques:

3M®Brand Solas is approved by the U.S. Coast Guard as a retro reflective material used to enhance visibility of life saving equipment in nighttime, or low light conditions.3M®brand Solas reflects brightly when viewed with night vision equipment, providing crystal-clear friend or foe identification.

TheVELCRO® BRAND FASTENER we use has the highest quality acrylic-based adhesive glue and is able to withstand extremely hot climates. HOOK SIDE ON BACK OF PATCH ONLY, WE DO NOT PROVIDE THELOOPSIDE.VELCRO® BRAND FASTENER 330 PSA 0172.

Solvent Based Inks.All the inks we use on our patches are Solvent Based.Solvent based inks are better than digitally printed or UV inks because they adhere better and have a thicker ink deposit.Solvent based inks will not fade, even if they are left outdoors for years.

Magic Black Infrared Ink.Magic Black is made and developed by Anytime Sign.We regulate the quality and the thickness for ultimate opacity in the visible spectrum.In the infrared spectrum, Magic Black becomes transparent allowing for the 3M®Brand solas to reflect light back to the Night Vision equipment, providing crystal- clear friend or foe identification.

VELCRO® is a registered trademark of Velcro BVBA, used with permission.