When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product description SIZE
Spanner Wrench:
- Length: 11.5in/ 29.2cm;
- Arms Opening Width: 0.75in/ 1.9cm - 4.3in/ 11cm;
Pins:
- 0.35 inch/ 9mm on the large side;
- 0.28 inch/ 7mm on the small side.
Material
Our spanner wrench is made of high-quality iron, which is not easy to bend.
Manufacturing
With good manufacturing, fine workmanship and in reliable quality, it is durable and strong.
Wide Applications
Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.
How to use? What does it work for? Adjust the arms to a suitable distance through the screw, then insert pins into the corresponding slots.
Used to fix, install, disassemble, screw and unscrew any accessories or part on a vehicle in the proper size.
Fit any bike, motorbike, moped and scooter.
Great for scooter clutch, trim cylinder, motorcycle flywheel, hydraulic gland, transmission gear, variator, hub, etc.
Is this useful?
Of course. With one spanner wrench, repair will become much easier! You can say goodbye to a pair pliers and free your two hands!
Will the spanner wrench rust after use?
Our spanner wrench is made of solid iron instead of stainless steel, because stainless steel is less strong and easy to bend, which cannot bear strong forces.
Iron performs better under extreme pressure.
Our spanner wrench will not rust if you put it in a dry place after use.
Will the spanner wrench wobble in use?
No. All the parts of our spanner wrench are made of solid iron and strongly connected.
Perfet Quality
Every piece of product has been carefully checked before packaging.
Magneto Flywheel Puller SIZE and WIDE APPLICATIONS
Puller Size: 24mm& 27mm.
24mm right hand thread for GY6 50cc 4 Stroke Scooter Moped ATV;
27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles.
· Does this Flywheel Puller fit for my motor?
You’d need to measure the head of the bolt or the flywheel nut to make sure.
Steps:
1.Take any plastic housing over the flywheel off
2.Look at the center of the flywheel.
3.If it is threaded or has grooves inside your flywheel, this will almost certainly fit it.
· What is the thread pitch for?
The thread pitch for both the 24mm side and the 27mm side is 1mm.
Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 1,365 4.8 out of 5 stars 966 4.5 out of 5 stars 1,569 4.8 out of 5 stars 3,284 4.8 out of 5 stars 3,502 4.4 out of 5 stars 3,289 Price — no data $9.99$9.99 — no data — no data — no data $8.99$8.99
- ※Dimension: Spanner Size: Arms Opening Width: 0.75in-4.3in (1.9cm-11cm); The large end of pin: 0.35in/9mm; small end of pin: 0.28in/ 7mm. Puller Size: 24mm& 27mm. 24mm right hand thread for GY6 50cc 4 Stroke Scooter Moped ATV; 27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles
- ※Material & Manufacturing: Our spanner wrench and magneto flywheel puller are made of high quality and denser magnetic steel, not easy to bend. With good manufacturing, fine workmanship and reliable quality, it is sturdy, durable and strong.
- ※Wide Applications: Spanner Wrench: Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots. Magneto Flywheel Puller: One with 2 sizes: 24mm& 27mm.
- ※ Package includes: 1 Spanner Wrench & 1 Magneto Flywheel Puller.
- ※Quality and Satisfaction Guarantee: Every piece of product has been carefully checked before packaging. If you are not satisfied with your purchase for any reason, EUICAE is pleased to refund you. We stand confidently behind our products with our satisfaction guarantee!
