When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Upower 2PCS Exhaust Tip 2.5" Inlet 2" x 6" Outlet 10" Long Rolled Rectangle Exhaust Tailpipe Tips Stainless Steel Polished Diesel Pipe Weld On
Features & details
- 【Design】Weld On - Rolled Edge - Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip
- 【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation
- 【Wide Application】Fits 2.5" INLET diameter car exhaust tail pipe.
Note: Please Measure the size of your Tail Pipe Before purchase, the outlet size of the tailpipe should match the inlet size of this Exhaust Tip.
Exhaust Tip Description:
- Features corrosion resistance to alkali solution and most organic and inorganic acids.
- Repeated polishing processing, bright as a mirror, highlighting the noble quality.
Exhaust Tip Features:
- Material: 304 Stainless steel with very strong anti-corrosive, never rusty
Package Included:
2*Stainless Steel Exhaust Tips
Step 1: Cleaning the Tailpipe
- Clean off the tailpipe and exhaust tip with penetrating oil and a shop rag.
- Make sure your tailpipe is at room temperature, and do not clean the surface of the tailpipe after the car just went out
Step 2: Sliding the Tip On
Try to slide the tip onto the exhaust pipe. You will probably meet some resistance, so use automotive grease to lubricate the pieces if necessary. Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
Step 3: Weld the Tip
weld a joint between the edges of the tailpipe and the exhaust tip to finish the installation.
