When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This purchase includes the parts for the kit as shown in the photos THAT you need to solder. Also includes the programmed UniBios 4.0 chip to be plugged in to the socket (provided) as well as some extra wire.Everything seen in the photos comes with the purchase.
Check my other listing for a preassembled kit For a higher price. To save some money buy this DIY kit. This kit comes in parts you need to assemble and solder.
See photos for kit assembly photos.
NeoBiosMasta 1.7 Neo geo mv1b mv1c with UniBios 4.0.
Comes with all parts you need to assemble it yourself - you supply the solder and flux and assemble.
Will require advanced soldering skill to assemble due to pin size and mounting the X68000 header.
Fitment guide is directly on the NeoBiosMasta board in the silk screen.
Includes fully programmed and tested Neo Geo UniBios 4.0 Bios Chip
Professional assembly recommended
This is specifically for Neo Geo MVS MV1C boards and MV1B boards
You’ll also need to solder 2 wires if you remove the old bios or solder 3 wires if you want keep the original bios chip on the board. Either way will work.
This unit plugs into your 68000 Motorola chip and if you do it successfully you’ll have UniBios 4.0. Perfect for consoled MVS, your Arcade board or OpenMVS project.
This is revision 1.7 and is brand new.
Every MVS Project has its own needs. Message me for any questions.
