WOODRIVER Socket Chisel 1\" For Sale

WOODRIVER Socket Chisel 1\", 161647, Forged from 100 CR-V steel. This alloy holds an edge that is also impact resistant., Factory-ground 25° bevel, Tempered in salt bath to HRC58-63, 1\" Wide Blade length is 4\"; Overall length is 9-5/8\" to 9-7/8\", The WoodRiver Bevel Edge Socket Chisel, the transition from the “flat” of the back to the socket was developed with a gradual slope. This avoids the back of the chisel from suddenly lifting on longer paring operations. The side bevels sweep back towards the centerline, allowing the chisel access to tight corners, which is imperative for dovetail work. The resulting flat area or “land” is a consistent 0.7mm – narrow enough for tight access but wide enough to prevent an troublesome sharp edge. The complete tool is designed with balance in mind to WoodRiver Socket Chisel 1\" - 161647 by WoodRiverThe WoodRiver Bevel Edge Socket Chisel, the transition from the “flat” of the back to the socket was developed with a gradual slope. This avoids the back of the chisel from suddenly lifting on longer paring operations. The side bevels sweep back towards the centerline, allowing the chisel access to tight corners, which is imperative for dovetail work. The resulting flat area or “land” is a consistent 0.7mm – narrow enough for tight access but wide enough to prevent an troublesome sharp edge. The complete tool is designed with balance in mind to increase comfort and performance. Each chisel incorporates a lightly finished Bubinga handle fitted to the socket. Our end result is a chisel that will give years and years of service and will become a favorite in your shop.

• Forged from 100 CR-V steel. This alloy holds an edge that is also impact resistant.
• Factory-ground 25° bevel
• Tempered in salt bath to HRC58-63
• 1\" Wide Blade length is 4\"; Overall length is 9-5/8\" to 9-7/8\"
• Each chisel ships with WoodRiver Silicon Chisel Guards