 |
|
Circa:
1960's-1970's
Price: $15.00 USD
Description: This is a nice adjustable wrench with the chrome plated type finish, marked '4" PROTO 704 FORGED ALLOY STEEL MFG USA '. It in good condition with over 95% of the nickel plating intact, very tiny chip..
|
Demo version
|
|
Circa:
1950's
Price: $16.00 USD
Description: This is a good used No. 8 Lufkin rule clamp, used for holding two steel rules together end to end. This one is in good shape with little wear, has a flame hardened type finish on it (somewhat like gu..
|
Demo version
|
|
Circa:
1940's-1950's
Price: $15.00 USD
Description: This is a 7/16" open ended wrench on both double ended end. One end set at about 30 degrees, making this a special purpose wrench. Marked "BONNEY MADE IN U.S.A. 401A CHROME-VANADIUM 7/16". Made by Bo..
|
Demo version
|
|
Circa:
1940's
Price: $16.00 USD
Description: This is a nice vintage socket firmer chisel marked "PEXTO MADE IN U.S.A.". It measures 1/2" wide x 7 1/2" long steel x 10 1/2" long overall. The handle is good and solid with some staining, but a nic..
|
Demo version
|
|
Circa:
1940's
Price: $10.00 USD
Description: This is a good vintage ratchet wrench marked "INDESTRO MFG. CO. CHICAGO ILL. U.S.A.". This is a single direction 7" long ratchet wrench in good working condition. Made of die formed steel. Slightly s..
|
Demo version
|
|
Circa:
1940-1950's
Price: $15.00 USD
Description: This is a top quality early style Crescent wrench marked "MFD. BY CRESCENT TOOL CO. JAMESTOWN N.Y. 8 IN DROP FORGED STEEL MADE IN U.S.A." There is a small grind mark taken out of the corner edge of t..
|
Demo version
|
|
Circa:
1940-1950's
Price: $15.00 USD
Description: Offering this 6" long, wire cutter pliers. These are all steel, with no cast pattern on the handle grip area. These are marked "KRAEUTER USA 4501-6" on one side. They are in good condition, with a go..
|
Demo version
|
|
Circa:
1930's-1950'S
Price: $15.00 USD
Description: This is a nice clean combination wrench with 15/16" open end at both ends, one offset. It is cast marked "BONNEY MADE IN U.S.A. 408 15/16 CHROME-VANADIUM".
|
Demo version
|
|
Circa:
1920's-1930's
Price: $15.00 USD
Description: This is a 8.5" implement combination wrench that is not marked by the maker. It's in good condition, not rusty, has pitting on it. The square boxed end is 1", the other opened end is 5/8, 5/8, & 3/4...
|
Demo version
|
|
Circa:
1920's
Price: $13.00 USD
Description: Offering this clean double open ended automotive wrench marked "FORD I M" on the main beam. A good wrench with an .68 & .72" open end sizes. The wrench is 5.3" long overall. A nice clean little wrenc..
|
Demo version
