 |
|
Circa:
1930's-40's
Price: $25.00 USD
Description: This is a nice clean 8.3" long puller that has two parallel pulling tabs that are spring loaded, so when you push down on the handle the two puller tabs that are inside the double side rails, pull sim..
|
Demo version
|
|
Circa:
early 1900's-1930's
Price: $25.00 USD
Description: This is a nice clean 6" long combination wrench, with 3 open ended wrench sizes. The sizes are 9/16", 11/16, and 7/8". There is some slight wear on the wrench edges mostly, otherwise in very good stra..
|
Demo version
|
|
Circa:
1920's
Price: $27.00 USD
Description: Offering this nice clean adjustable automotive wrench marked "FORD" on the solid jaw, and "MOORE DROP FORGING CO. SPFLD MASS" on the handle. A nice adjustable wrench that will open to a 2" capacity be..
|
Demo version
|
|
Circa:
1920's-30's
Price: $25.00 USD
Description: Offering this nice clean combination box automotive wrench marked "FORD U.S.A. M 01A-17017 B" on the main beam. A nice offset style wrench with an 11/16" box end, and a 13/16" boxed end. The wrench is..
|
Demo version
|
|
Circa:
early 1900's
Price: $45.00 USD
Description: This is a very nice, fancy turned handle, hardwood mallet! Made from apple-wood or similar tight grained wood, it has a 2.5" diameter. The handle passed through the head, and is 11.00" long, and very ..
|
Demo version
|
|
Circa:
early 1900's-1950's
Price: $18.00 USD
Description: This is a very nice hardwood mallet! Made from locust or similar lighter wood, it has a 2.25" diameter. The handle passed through the head, and is 13.25" long, and very firmly attached to the head. As..
|
Demo version
|
|
Circa:
mid 1900's
Price: $12.00 USD
Description: This is a new old stock chrome finish, 10" size adjustable wrench replacement jaw. This one will fit the older adjustable 10" wrenches with the Diamond Calk & Horseshoe, and, or Diamond Tool markings...
|
Demo version
|
|
Circa:
mid 1900's
Price: $15.00 USD
Description: This is a new old stock chrome finish, 10" size adjustable wrench replacement Knurl wheel, threaded pin, and small counter spring. This one will fit the older adjustable 10" wrenches with the Diamond ..
|
Demo version
|
|
Circa:
mid 1900's
Price: $10.00 USD
Description: This is a new old stock chrome finish, 12" size adjustable wrench replacement Knurl wheel. This one will fit the older adjustable 12" wrenches with the Diamond Calk & Horseshoe, and or Diamond To..
|
Demo version
|
|
Circa:
late 1800's
Price: $40.00 USD
Description: This is a very rare tool manufactured in the 1890's in Greenfield Mass! This slot bit screwdriver is 13" long fully extended, 8.5" long closed and locked in a stationary position, without the bit in t..
|
Demo version
