 |
|
Circa:
1990's
Price: $180.00 USD
Description: This is a very nice, clean, quality 0-18" capacity vernier caliper, marked "KANON STAINLESS MADE IN JAPAN". This is a very good quality caliper with Outside readings on one side of the caliper. It fea..
|
Demo version
|
|
Circa:
1930-50's
Price: $125.00 USD
Description: This is a nice, clean, quality 0-12" capacity vernier caliper, marked "BROWN & SHARPE MFG. CO. PROVIDENCE R.I. U.S.A.". This is a very good quality caliper with Outside readings on one side of the cal..
|
Demo version
|
|
Circa:
1970's
Price: $125.00 USD
Description: This is a nice, clean, quality 0-12" capacity vernier caliper, marked "THE L.S. STARRETT CO. ATHOL MASS. MADE IN U.S.A. NO. 122 ". This is a very good quality caliper with Outside readings on one side..
|
Demo version
|
|
Circa:
1940's-50's
Price: $15.00 USD
Description: This is a clean, unmarked 8" long .673 to .690 tapered reamer, designed to be used in your hand brace as it has the tapered chuck end. This is a nicely ground, good sharp tool and appears to be harden..
|
Demo version
|
|
Circa:
1940's-50's
Price: $48.00 USD
Description: Offering and nice clean Lufkin 1-2" Micrometer, ready to use on your precision parts. It is marked "THE LUFKIN RULE CO. SAGINAW MICH. MADE IN U.S.A. 1 TO 2 IN. PAT. NO. 2,212,910". It features the sat..
|
Demo version
|
|
Circa:
1920's-1930's
Price: $125.00 USD
Description: This is a very nice clean ratchet wrench and socket set marked "FRANK MOSSBERG CO. ATTLEBORO MASS. U.S.A. NO. 350 PAT. NOV. 11, 1913" on the ratchet wrench. It's also marked "SOCKET WRENCH SET NO. 13 ..
|
Demo version
|
|
Circa:
Pre 1905
Price: $18.00 USD
Description: This is a nice clean steel outside spring caliper that is in very good working condition with about an 6" capacity (a bit more depending on your application), and will close to 0 also. This caliper i..
|
Demo version
|
|
Circa:
Early 1900's-1950
Price: $15.00 USD
Description: This is a quality made 3" long outside caliper in very good used condition. It is marked " STARRETT". It's in good+ condition. Very little wear, no rust or pitting, light darkening of finish. A hard ..
|
Demo version
|
|
Circa:
1970's
Price: $15.00 USD
Description: This is a quality made ball bearing beveled hand held roller, creaser marked "THE EVERHARD MFG. CO. CANTON O.". on the metal frame. It has a very nice, solid hardwood handle, with a brass ferrule. Th..
|
Demo version
|
|
Circa:
1970's
Price: $18.50 USD
Description: This is a very clean older zig-zag rule marked "LUFKIN X46 RED END EXTENSION RULE" in red print on the rule. Nice brass 6" slide extension, brass joints and end caps as well. In very nice condition w..
|
Demo version
