 |
|
Circa:
1930's-50's
Price: $45.00 USD
Description: This is a rarely seen antique triple jointed caliper, or a caliper with two extra mid-leg joints. It is marked "UNION SPRING & MFG. CO. PITTSBURGH PA" on one leg. Although this caliper appears to be..
|
Demo version
|
|
Circa:
1856-1894
Price: $40.00 USD
Description: This is a nice antique (late 1800's), top quality steel tanged firmer chisel. Tanged refers to the tang that projects from the chisel steel into the hardwood handle to secure it in place. This chisel ..
|
Demo version
|
|
Circa:
Late 1800's
Price: $25.00 USD
Description: This is a nice quility steel heavy duty .50" (1/2") wide socket firmer chisel marked "SAMSON UNION TOOL CO. TORRINGTON CONN. U.S.A." on the steel. It is 12.4" long overall, it..
|
Demo version
|
|
Circa:
Late 1800's
Price: $28.00 USD
Description: This is a nice quility steel heavy duty .13" (1/8") wide socket mortise chisel marked "RIVERSIDE FARWELL & MURPHY ST. PAUL" on the steel. There is a anvill logo stamped in the cent..
|
Demo version
|
|
Circa:
Late 1800's
Price: $28.00 USD
Description: This is a nice old 19th century heavy duty .5" (1/2") wide socket firmer chisel marked "THE DOUGLASS NO.1 BEST CAST STEEL" on the steel. It is 12.0" long overall. It has been ..
|
Demo version
|
|
Circa:
Late 1800's
Price: $35.00 USD
Description: This is a nice old 19th century heavy duty 1.25" (1-1/4") wide socket firmer chisel marked "ALBION WARRENTED" on the steel. It is 13.25" long overall. It has been used but is ..
|
Demo version
|
|
Circa:
Mid-1900's
Price: $60.00 USD
Description: This is a very nice, rare small size, measuring tape with the steel 50' tape, marked "THE LUFKIN RULE CO. SAGINAW MICH. U.S.A. 50" on one side, and "ANCHOR JR. 50FT REG. US PAT OFF. DES. PAT. 120,369"..
|
Demo version
|
|
Circa:
early 1900's
Price: $35.00 USD
Description: This is a very good, sharp, sharp 8" blade, draw knife, not marked with any makers name. It has some grip type tape wrapped around the handles perhaps because the one handle start to crack, but b..
|
Demo version
|
|
Circa:
early 1900's
Price: $35.00 USD
Description: This is a hard to find boring machine auger bit (1.25 dia. x 12.5" long) (end shaft diameter is about .49") not marked by a maker's name, but is the type with the double lip and spur. Overal..
|
Demo version
|
|
Circa:
early 1900's
Price: $24.00 USD
Description: This is a clean cast iron hand saw jointer gage marked "DIAMOND EDGEquot; on one side and "PAT'D SEPT.8.1903 & MAR.8.1911" on the other side, all cast lettering. It's in very nice condition with littl..
|
Demo version
